With the continuous development of LED lighting industry, acrylic light the word in recent years in the advertising logo signs of rapid promotion, advertising production industry as a new profit growth point. Acrylic light produced a variety of ways words, materials are not the same, here are some common production method:
1. Iron flanges paint (that is, the practice of traditional metal characters), the surface of acrylic, built-in LED lamp or LED.
2. Stainless steel flanges, surface acrylic, built-in LED lamp, or the built-in LED.
3. Aluminum flanges paint, acrylic surface, built-in LED lamp, or the built-in LED.
4. Quintana paste acrylic sculpture, built-in LED lamp, or the built-in LED.
5. Acrylic Plastic, semi-relief style literally, built-in light.
6. The number of fat a molding, built-in LED, and so on.
Some are more costly than some of the practice, and here I highlight is another approach that is easy to bend with the side of Po Wai, literal use of acrylic, the back with a PVC or aluminum panels, built-in LED practice I hope the producers give the entrants some help.
Yi Bao, also known as light bending word sidebar since launch, after many improvements, its price is low, convenient features such as rapid popularization. According to the size of the word, usually 8-10 cm wide, with more.
Yi Bao bending conventional production process: first, the customer-determined words or signs with engraving machine made of acrylic or other means literally, word for word according to the size of the back can be made of PVC foam sheet, or synchronous aluminum plate and other materials; The second step is to side with the literal word of bonding, we use the three seconds glue, bonding the advantage of fast, good amount of drawback is to master, easy to deface literally, the solution is not garish plastic bottle cut in order to control flow, the second is that proficiency. Bonding with the characters before a certain edge to make the literal face of Article slot full agreement, especially the word of the corners and turnings. This process directly affects the accuracy and quality of the product, they must be serious action. Making the utilization of iron scissors, flat nose screwdriver and other tools.
Be noted that the joint skills: first lateral side section cut off section, a bottom and the metal parts to remove 3-5 cm (note that before the award must stay out of this 3-5 cm, or can not overlap ), the other end, in contrast, remove the skin, then glue a solid three seconds, so that the upper half of a word is successful. Then there's another part of the word, PVC foam sheet or aluminum plate floor with LED lights set the bond, based on experience, white characters are generally 60-80 group with a piranha module / m, the appropriate increase in the number of Mermaid , colorful effect is appropriate based on this percentage increase or decrease. Use quick-drying glue, such as three seconds or glass adhesive for bonding, light group placed a strong need for uniform, wiring should be firmly and correctly. Then that connection links, wiring generally use two different colors of wire to connect to the distinction between positive and negative power supply, the bottom side in the opening words of the hole diameter of 4-6 mm, lead out, to stick the light and set the floor embedded Wai Under the literal good groove, cement, glass glue to seal the line of holes. In order to reduce costs, producers now are mostly non-waterproof module, so to ensure the normal use, production is especially important when the seal. A complete word will be made of light. 12V power supply connected to test the final test lights, no problem, it can be installed.
In contrast, production of luminous words the bigger the better, because the curved side of the gap bigger, more easy to use. One might ask: was it a bad shape after the LED is not on the exchange can not it? This is not to worry, this is precisely the advantages of LED, LED under normal circumstances, the use of up to 10 years, even if individual light is not that would affect the overall results.
Another interesting question is, LED light LED light module to use the word in the process, we must pay attention to voltage problems. Do not only do a loop, from the first series to end. This will not only end to end voltage difference between the result of brightness as inconsistent, but also produces single overcurrent burned circuit board problem. Correct approach is as much more parallel loops to ensure a reasonable distribution of voltage and current.
Colleagues in the majority of the advertising industry making use of LED Applications LED light word, in addition to considering the stability of LED light bars outside, but also according to product requirements to determine the LED emitting angle, brightness and wavelength between pipe and tube Shipi In the allowed range. Only reasonable choice of different specifications of LED, in order to ensure product quality standards, while the product cost to a minimum.
